Easy Ways To Connect PVC Pipe And Make The Work Look Impressive

ดูรายละเอียดผลิตภัณฑ์ได้ที่  www.advancedpipe.co.th

สนใจผลิตภัณฑ์สอบถามข้อมูลเพิ่มเติมที่ 084-388-3709

Easy Ways To Connect PVC Pipe And Make The Work Look Impressive

If you are one of the people who install or connect PVC pipe for work but you are still a rookie who is not certain how to make the outcome look impressive for your customers, educating yourself with accurate information will increase the reliability and quality standard of your expected executions. therefore, we conclude easy methods for connecting this type of PVC pipe so you can achieve what you wanted and intend. 

7 PVC Pipe Connecting Methods With Impressive Outcomes

Before we install the PVC pipe, we need to connect them first, which is not as hard as you think. The first step is to prepare some equipment such as a hacksaw or pipe scissors, a file, a marking pen, a pipe cleaner, and a pipe solder. Then, you will be able to easily follow our methods, which are:

1. Begin cutting the pipes to the desired length with pipe cutters or a hacksaw
2. When the pipe is cut out, use a file to remove the corner of the pipe, which needs to make an angle of 15 degrees (the stuck PVC can be removed with your finger).
3. Measure the depth of the end of the pipe that needs to be attached to the pipe joint. (Some people don’t have a ruler or a tape measure, a tape measure, etc., but you can estimate the length approximately. It doesn’t have to be very precise.)
4. When the desired length is obtained, use a pipe cleaner to wipe the area where the pipe will be connected to the joint for cleaning purposes. (In case of not installing PVC pipes in industrial plants, you can use only a clean cloth to wipe, no detergent is needed.)
5. After the wipe is complete, use the pipe binder and apply it to the area that needs to be cleaned, such as the end of the pipe or pipe joint. It should be applied both internally and externally. For those who have to connect the pipe to the PVC ball valve, be careful not to allow this pipe binder to enter the ball. Because otherwise the ball will melt and make it leak more quickly.
6. Then, try to fit the pipes into the pipe joints right away. Next, twist the pipe and connector together. Let the binder be thoroughly in the needed area.
7. Finally, wipe the excess liquid from the pipe joint. And now the pipe can be installed and used

So, how was the PVC connecting methods? It’s not hard just like we mentioned, isn’t it?

If you like to install or connect the pipe and make it look skilled, apart from the ways we have already told you, you should also prepare a standard PVC pipe that has a TIS mark to use it as smoothly as possible. No risk of a pipe breaking easily or deteriorating quickly. At the end of the day, no matter how good the method is, if the pipe doesn’t good, it’s not going to work as well.

For more information, click https://www.cppc.co.th/pvc-pipe-fitting/

Or https://advancedpipe.co.th/